The Hammer Kit includes everything you need to start developing with Linux on the 40-pin ARM9 Hammer CPU board.

The Hammer Kit contains one each of the following items:

• Hammer: Samsung S3C2410A ARM9 CPU board in a 40-pin DIP package
• Hammer Carrier: prototyping board designed for use with the Hammer CPU board
• Flyswatter: USB based JTAG programmer for the Hammer CPU board
• 5V1A Power Supply: 5V power supply for the Hammer Carrier board
• USB Cable A to B: USB cable for the Flyswatter
• RS232 Serial Cable – serial cable to connect the Hammer Carrier to a PC/terminal
• JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches)
• Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes.

• How to Create a "Hello World" Program for the Hammer
• Accessing the Hammer's IO Ports and Peripherals via the Command Line
• Hammer LED Userspace Application
• Source file: Ledblink.c
• Hammer LED control program
• Source file: ledctl.c
  
• Hammer Pin Assignments
• HOW TO: Connect a USB Host Interface to the Hammer
• How to Interface the Hammer to 5V I2C-bus Devices

Other References

• More information on the Hammer can be found on the elinux.org wiki located here: http://www.elinux.org/Hammer_Board
• Ethernet: http://www.elinux.org/Hammer_Ethernet
• Bluetooth: http://www.elinux.org/Hammer_Bluetooth
• 802.11b/g: http://www.elinux.org/Hammer_WiFi
• Webcam: http://www.elinux.org/Hammer_Webcam
• XBEE Wireless:  Attaching XBEE Wireless Module to Hammer
• HOWTOs: http://www.elinux.org/Hammer_Board_HOWTOS
• Software: http://www.elinux.org/Hammer_Board_Software
• Languages: http://www.elinux.org/Hammer_Board_Software_Programming
• Kernel Drivers: http://www.elinux.org/Hammer_Board_Example_Kernel_Drivers
• Information on three basic types of operations with a LED are documented here: http://www.elinux.org/Hammer_LED_Driver
• Additional information about the Apex bootloader can be found here: http://www.elinux.org/APEX
• The following wiki pages have information on using the Flyswatter: http://www.elinux.org/Flyswatter
• http://www.elinux.org/Hammer_How_to_use_Jtag
• How to install OpenOCD for the Flyswatter
• Gentoo Linux (http://www.gentoo.org ) has a web page dedicated to the Hammer and Nail board: http://www.gentoo.org/proj/en/base/embedded/handbook/?part=4&chap=1