NOTE: The software offered here is without any warranties. By downloading software here, you are agreeing to use it at your own risk. Robotcraft.ca doesn't assume any responsibility for damage caused by software downloaded here.
|Devantech I2C Adapter GUI||Devantech I2C Adapter - can be used to communicate to any device that can speak I2C. So, we decided to write some front-end that it can be used effectively during development process.||N/A|
|Modded Core Arduino Package||OLD STAFF. It supports ATMega32 ONLY. This is command line only Arduino environment modded to support ATMega32 from Atmel. It requires installation of full Arduino-0011 IDE environment to work. Please, refer to Makefile content in this ZIP on how to set up command line environment.||Download|
|Arduino IDE ATMega 32/644 Patch||This zip contains five files that are needed to patch Arduino IDE to support ATMega32 and ATMega644. Please, refer to the following DIFF screen shot for details.||Download|
|Arduino IDE ATMega 48/324/32/644 Patch||
This patch will enable your Arduino IDE to generate HEX files for ATMega 48/32/324/644 AVR microcontrollers. The ZIP contains seven files and it needs to be unzipped in arduino-0014/hardware/cores/arduino directory. ATMega 48/324 support is still experimental and not fully tested yet. Make sure you create a backup copy of your arduino-0014/hardware/cores/arduino directory before you apply the patch. Please, read here what changes are needed to your arduino-0014/hardware/boards.txt file.
NOTE: The ZIP was updated on May 2, 2009. The update includes a fix to digitalRead-related issues. The code was tested with arduino-011 and arduino-014 versions.
|McuJavaSource||In a planning stage: support for ATMega32, ATMega644, ATMega128, ATMega168.||N/A|