Shopping Cart

You have no items in your shopping cart.

GPS

GPS
 
 

   

Set Descending Direction
per page
  1. Copernicus DIP Module

    Copernicus DIP Module

    $90.33

    Out of stock

    The Copernicus is a great new GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. The Copernicus DIP breakout has an impedance-matched, end-launch, standard SMA connector that will mate with our SMA GPS antennas listed below.

    Documents:

    Software:

    Learn More
  2. Antenna GPS 3V Magnetic Mount SMA

    Antenna GPS 3V Magnetic Mount SMA

    $20.76

    Magnet mount antenna for GPS modules operating at 3V. Designed for used with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph. 5meter cable terminated with standard male SMA connector.

    Features:
    • Gain 26dB
    • VSWR <2.0
    • Voltage 3.3V +/- 0.5V
    • Current 12mA
    • Weight 50g

    Documents: Datasheet

    Learn More
  3. GPS Evaluation Board

    GPS Evaluation Board

    $44.37

    This is an evaluation board for our various GPS modules that incorporates many new features! This one board supports connection to the various GPS modules sold by SparkFun. Serial interface for USB over the FT232RL and a classic RS232 interface. Power is provided over USB or a DC barrel jack. A power switch, port selection, and serial isolation switches are available.

    Supported Modules:
    • EB-85A
    • EM406
    • EM408
    • Lassen iQ
    • Copernicus (requires female socket installation)
    Features:
    • On board 5V regulation
    • Power over USB
    • Power over 5.5x2.1mm barrel jack (center positive)
    • Status LED
    • 12mm Coin Cell backup battery holder
    • Serial over USB (FT232RL VCP)
    • Serial over dual RS232 connection
    • All serial ports broken out
    Documents:
    Software:
    Learn More
  4. 20 Channel EM-406A SiRF III Receiver with Antenna

    20 Channel EM-406A SiRF III Receiver with Antenna

    $69.99

    The EM-406A GPS module from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable included. Learn More
  5. 32 Channel ETek GPS 5Hz Receiver with Antenna

    32 Channel ETek GPS 5Hz Receiver with Antenna

    $109.84

    Out of stock

    The EB-85A is a ridiculously powerful new GPS receiver from ETek. This receiver is the first receiver we've seen with a 5Hz update rate, and has an amazing set of features and specs!

    Please note at 5Hz the serial stream is large enough the default baud rate is 38400bps - but the unit is completely configurable! The unit configuration is stored in volatile memory and is reset when power cycled. Use a battery backup to maintain user settings.

    We are also throughly impressed with the MiniGPS software that was provided by ETek. This free software allows for an easy to use GUI to reconfigure the EB-85A as well as datalog incoming NMEA sentences! Checkout the screen shot - we were able to track over 9 satellites indoors.

    Features:
    • 5Hz max update rate
    • Default 38400bps
    • Selectable update rate from 1 to 5Hz
    • Selectable baud rate from 4800 to 115200bps
    • Support for DGPS, WAAS, EGNOS, MSAS
    • 32 parallel channel receiver architecture
    • -158dBm sensitivity
    • 3.3m accuracy
    • 2.6m accuracy with DGPS
    • 3.3 to 5V supply
    • 59/42/33mA power consumption
    • 2 NMEA serial ports
    • Battery backup pin
    Documents:
    Dimensions:
    • 30x30x8.5mm (1.2x1.2x0.3")
    • 15grams
    • 100mm cable included
    8-pin SMD connector and evaluation board available below.
    Learn More
  6. 20 Channel EM-408 SiRF III Receiver

    20 Channel EM-408 SiRF III Receiver

    $74.55

    The EM-408 GPS module from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes a built-in patch antenna and an MMCX connector for an optional external antenna! 5-pin interface cable included. Learn More
  7. GPS MiniMod

    GPS MiniMod

    $112.04

    Out of stock

    This miniature GPS module uses the compact GR10/MN1010 GPS module in conjunction with a GPS chip antenna and a SMA661AS 18dB LNA from ST Electronics. This board is about as simple as it gets, having only 3 connections: VCC, ground and a TX line. Power the board from a single 3.5V-6V source (ideal for single Lipo cell operation) and the unit will output NMEA serial sentences containing all the GPS data (location, satellites in view, altitude, time, speed, heading, etc).

    Features:
    • TX, 3.3V TTL Serial
    • VCC, 3.5 to 6V, 45mA
    • Status LED indicating GPS lock
    Documents:
    Dimensions:
    • 0.62x1.35" (16x35mm)
    • less than 0.5oz
    Learn More
  8. 32 Channel LS20031 GPS 5Hz Receiver

    32 Channel LS20031 GPS 5Hz Receiver

    $69.99

    The LS20031 GPS receiver is a complete 5Hz GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 32 channel GPS SMD type receivers that use MediaTek chip solution. Learn More
 
 

   

Set Descending Direction
per page
[profiler]
Memory usage: real: 25952256, emalloc: 25538804
Code ProfilerTimeCntEmallocRealMem