Shopping Cart

You have no items in your shopping cart.

Accelerometers

Accelerometer sensors
 
 

   

Set Descending Direction
per page
  1. Triple Axis Accelerometer Breakout -LIS3LV02DQ

    Triple Axis Accelerometer Breakout -LIS3LV02DQ

    $48.05

    Breakout board for the 3 axis LIS3LV02DQ accelerometer from ST Micro. Please view the datasheet for this impressive sensor! With a digital interface (SPI or I2C), the user only has to initiate commands to get 1mg resolution! Independent channels can be shut off, the sensor can be powered down, even an interrupt threshold can be set and used to awaken the sensor from power down! Selectable ranges are available for +/-2g and 6g. This sensor is one of the first with triple axis and an easy to use digital interface. Board comes fully assembled and tested with external decoupling caps.

    We were thoroughly impressed with the flexibility and precision of this sensor. This is a great sensor to play with if you need triple axis accelerations in digital form and you don't want to deal with analog conversions or filtering.

    Dimensions: 21x23mm (0.8x0.9")

    Documents:

    Interface: The LIS3LV02DQ is a 3.3V part and outputs SPI or I2C digital. This can be interfaced to any micro with or without built-in SPI or I2C support. Fake it in firmware! See example code.

    Learn More
  2. Triple Axis Accelerometer Breakout -ADXL330

    Triple Axis Accelerometer Breakout -ADXL330

    $42.95

    Breakout board for the 3 axis ADXL330 from Analog Devices. This is the latest is a long, proven line of Accelerometers from Analog - and now the holy grail has finally arrived. The ADXL330 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA! Sensor ranges from +/-3g. Board comes fully assembled and tested with external components installed.

    Dimensions: 0.7x0.7"

    Documents:

    Interface: The ADXL330 is a 3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.

    Learn More
  3. Accelerometer Breakout Board -ADXL320 +/-5g

    Accelerometer Breakout Board -ADXL320 +/-5g

    $32.74

    Breakout board for the dual axis ADXL32x accelerometers. Brings out the analog voltage levels from the X and Y axis to a standard .1" header. The ADXL320 can be powered from 2.4V-5.25V. The Self-Test pin can be used to verify sensor operation.

    Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors.

    Installed Sensor: ADXL320 (+/- 5g)

    Dimensions: 18x18 mm (0.70x0.70")

    Documents:

    Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.

    Learn More
  4. Accelerometer Breakout Board -ADXL321 +/-18g

    Accelerometer Breakout Board -ADXL321 +/-18g

    $32.74

    Breakout board for the dual axis ADXL32x accelerometers. Brings out the analog voltage levels from the X and Y axis to a standard .1" header. The ADXL320 can be powered from 2.4V-5.25V. The Self-Test pin can be used to verify sensor operation.

    Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors.

    Installed Sensor: ADXL321 (+/- 18g)

    Dimensions: 18x18 mm (0.70x0.70")

    Documents:

    Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.

    Learn More
  5. Accelerometer Breakout Board -ADXL322 +/-2g

    Accelerometer Breakout Board -ADXL322 +/-2g

    $32.74

    Breakout board for the dual axis ADXL32x accelerometers. Brings out the analog voltage levels from the X and Y axis to a standard .1" header. The ADXL320 can be powered from 2.4V-5.25V. The Self-Test pin can be used to verify sensor operation.

    Board comes fully assembled and tested with selected sensor and 0.1uF filtering capacitors.

    Installed Sensor: ADXL322 (+/- 2g)

    Dimensions: 18x18 mm (0.70x0.70")

    Documents:

    Software: The ADXL32x outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.

    Learn More
  6. Triple Axis Accelerometer Breakout -MMA7260Q

    Triple Axis Accelerometer Breakout -MMA7260Q

    $22.29

    Out of stock

    Breakout board for the 3 axis MMA7260Q accelerometer from Freescale. Please view the datasheet for this impressive sensor! With a low power shut-down mode, high sensitivity output with selectable ranges (+/- 1.5, 2, 4, and 6g), this sensor is one of the very first to market with three accelerometers sensors built onto a single IC! Board comes fully assembled and tested with external filters installed.

    Checkout Tom Igoe's online tutorial using the MMA7260Q!

    Dimensions: 25x25 mm (1x1")

    Documents:


    Interface: The MMA7260Q is a 3.3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital converter.

    Learn More
  7. Triple Axis Accelerometer Breakout - LIS302DL

    Triple Axis Accelerometer Breakout - LIS302DL

    $21.98

    This is a breakout board for the LIS302DL accelerometer. The LIS302DL is a really impressive little IC. Low cost, digital interface, small footprint, easy to use, and it has some great features built in.  Version of the breakout board can only be used in I2C mode. Future versions will have the CS pin broken out so that it can used with I2C or SPI interface.

    Features:
    • 2.16-3.6V @ 0.3mA
    • I2C Interface
    • +/-2g / +/-8g selectable
    • 8-bit resolution
    • Click and double click recognition
    • Programmable interrupt generator
    • Free fall detection
    Documents:
    Dimensions: 0x55x0.6" Learn More
  8. Triple Axis Accelerometer Breakout - SCA3000

    Triple Axis Accelerometer Breakout - SCA3000

    $64.21

    This is a compact breakout board for the SCA3000 triple axis accelerometer from VTI. This highly precise and temperature compensated accelerometer is a good option for IMU and dead-reckoning applications. The low noise and temperature compensation significantly reduces drift over time.

    SCA3000-D01 has an easy to use SPI interface. This breakout board includes a low noise, low drop out, 3.3V regulator that accepts voltages from 3.35V to 10V.

    Dimensions: 0.5x0.8"
    Documents:
    Learn More
 
 

   

Set Descending Direction
per page
[profiler]
Memory usage: real: 28311552, emalloc: 27981868
Code ProfilerTimeCntEmallocRealMem