Motors & Servos

The GWS S03T servo is a standard-sized servo with an extra-high gear ratio that provides almost double the torque of a typical servo. The servo is 4 mm taller than most standard servos. Learn More

The GWS S777 6BB Giant Servo is our largest, heaviest-duty servo, weighing it at 6.7 oz and providing 583 oz * in of torque.

We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More

The GWS S04 BBM Large Servo is a great value: a heavy duty, giant servo that packs over 180 oz * in for less than $20!

We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More

The GWS S125 1T BB Sail Winch Servo is a unique servo (typically used for radio control sail boats) that can rotate a full 360 degrees, rather than the typical range of less than 180 degrees for most servos.

We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More

The GWS S03N XF Standard Servo is the faster option between the S03N models we carry, providing 34 oz * in at a speed of 0.12 seconds per 60 degrees of motion at 6 V.

We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More

The GWS S03N Standard Servo is the higher-torque option between the S03N models we carry, providing 56 oz * in at a speed of 0.18 seconds per 60 degrees of motion at 6 V.

We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More

For projects that require brute strength, look no further than theGWS S666N 2BB MG giant-scale servo. This servo will deliver eight times the torque of a standard servo, has two ball bearings, and has metal gears to handle those extra-tough loads. Learn More

'Little Buggers Incorporated' thats the nick that comes to mind when you see these motors work. If you put four of these motors on the robot (refer to the picture below), it's almost like watching four ballet dancers performing in-sync. Well, I'm pushing a little bit too far with my comparison here but they are that good when it comes to moving things. If you are working on a small robot or automation project, they will be great provided that motor specs defined below meet your requirements.

Learn More

The GWS NARO PRO Sub-Micro Servo is among the fastest servos we carry; it is recommended for use at 4.8 V. We carry 11 different types of servos, all of which are compatible with our servo controllers. The sizes range from a giant-scale servo with up to 583 oz.in. of torque to a sub-micro servo weighing less than 1/4 of an ounce. Whatever your application, we probably have a servo for it!

Note: The servos must be connected to a servo controller or an RC receiver to be used. All of the servos have Futaba or Futaba-compatible connectors.

Servo Specification Comparison Table

Learn More